iPhone 16 Plus 屏幕 更换

moderate30 minutes - 1 hour

Use this guide to replace a broken, cracked, or non‑responsive screen on your iPhone 16 Plus.

You'll need replacement screen adhesive to complete this repair.

Note: Since you can't disconnect the battery during this repair, make sure your phone stays powered down, don't use metal prying tools, and be careful not to touch exposed contacts.

After a screen replacement, True Tone and auto brightness may be disabled. Calibrate original Apple screens using [link|https://support.apple.com/en-us/120579|Repair Assistant|new_window=true] to restore this functionality.

Prepare your phone for disassembly

Tape over any cracks

Mark your opening picks

Remove the pentalobe screws

Heat the bottom edge

Insert an opening pick

Screen information

Separate the bottom adhesive

Heat the right edge

Separate the right adhesive

Heat the top edge

Separate the top adhesive

Heat the left edge

Separate the left adhesive

Prop up the screen

Remove the cover screws

Remove the screen connector covers

Disconnect the screen

Remove the screen

Remove the ambient light sensor bracket

Pry up the ambient light sensor

Peel up the ambient light sensor cable

Remove the ambient light sensor

Disassembly complete

Place the ambient light sensor

Press the ambient light sensor

Install the ambient light sensor bracket

Remove the screen adhesive

Orient the adhesive

Expose the bottom edge of the adhesive

Apply the adhesive

Press the adhesive into place

Remove the top liner

Prop up the screen

Connect the screen and front sensor

Cover the connectors

Install the cover screws

Remove the final adhesive liners

Place the screen

Heat the screen

Press the back glass

Install the pentalobe screws


After your repair, calibrate a genuine replacement screen using Apple's [link|https://support.apple.com/en-us/120579|Repair Assistant|new_window=true]. Navigate to Settings General About Parts & Service History, tap Restart & Finish Repair, and follow the onscreen prompts.

Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].

Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting|new_window=true]], or ask our [link|https://www.ifixit.com/Answers/Device/iPhone_16_Plus|iPhone 16 Plus Answers Community|new_window=true] for help.