Use this guide to replace the loudspeaker in your iPhone 15 Pro.
If the sound coming through your iPhone sounds like static or crackling, and it's not due to a [link|https://9to5mac.com/2023/10/03/iphone-15-crackling-sound-speakers/|software issue|new_window=true], your loudspeaker may need to be replaced.
''You'll need replacement screen adhesive to complete this repair''.
Prepare your iPhone for disassembly
Tape over any cracks
Mark your opening picks
Remove the pentalobe screws
Heat the bottom edge
Insert an opening pick
Screen information
Separate the bottom edge adhesive
Heat the right edge
Position the opening pick
Release the right clip
Separate the right edge adhesive
Heat the top edge
Separate the top edge adhesive
Heat the left edge
Separate the left edge adhesive
Prop up the screen
Unfasten the logic board cover
Remove the logic board cover
Disconnect the battery
Disconnect the screen
Disconnect the ambient light sensor
Remove the screen
Unfasten the loudspeaker
Remove the loudspeaker
Disassembly complete
Install the loudspeaker
Install the loudspeaker screws
Remove the screen adhesive
Orient the adhesive
Apply the adhesive
Press the adhesive into place
Remove the top liner
Adhesive information
Prop up the screen
Connect the screen and ambient light sensor
Connect the battery
Install the logic board cover
Fasten the logic board cover
Remove the final adhesive liners
Place the screen
Press the screen
Install the pentalobe screws
Heat the screen
Press the back glass
Congratulations on replacing the loudspeaker!
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Device/iPhone%2015%20Pro|Answers community] for help.