Use this guide to replace a broken, cracked, or non-responsive screen on your iPhone 15 Pro.
''You'll need replacement screen adhesive to complete this repair.''
Note: Due to [link|https://www.ifixit.com/News/82867/iphone-15-teardown-reveals-software-lockdown|Apple's parts pairing restrictions|new_window=true], on iOS 17.6 and earlier, True Tone and auto brightness are disabled after a screen replacement, even when using an original Apple screen. On newer iOS versions, these features may be restored automatically. If you're using an original Apple screen, you can use [link|https://support.apple.com/en-us/120579|Repair Assistant|new_window=true] to calibrate it with your iPhone.
Prepare your iPhone for disassembly
Tape over any cracks
Mark your opening picks
Remove the pentalobe screws
Screen bezel information
Heat the bottom edge
Insert an opening pick
Screen information
Separate the bottom edge adhesive
Heat the right edge
Position the opening pick
Release the right clip
Separate the right edge adhesive
Heat the top edge
Separate the top edge adhesive
Heat the left edge
Separate the left edge adhesive
Prop up the screen
Unfasten the logic board cover
Remove the logic board cover
Disconnect the battery
Disconnect the screen
Disconnect the ambient light sensor
Remove the screen
Ambient light sensor information
Remove the ambient light sensor cover screws
Remove the ambient light sensor cover
Heat the ambient light sensor adhesive
Pry up the sensor
Reheat the ambient light sensor
Remove the ambient light sensor
Disassembly complete
Prepare the ambient light sensor
Place the ambient light sensor
Press the ambient light sensor
Install the ambient light sensor bracket
Remove the screen adhesive
Orient the adhesive
Apply the adhesive
Press the adhesive into place
Remove the top liner
Adhesive information
Prop up the screen
Connect the screen and ambient light sensor
Connect the battery
Install the logic board cover
Fasten the logic board cover
Remove the final adhesive liners
Place the screen
Press the screen
Install the pentalobe screws
Heat the screen
Press the back glass
Congratulations on completing the repair!
After your repair, depending on the replacement part, you may be able to [link|https://support.apple.com/en-us/120579|pair it using Apple's Repair Assistant|new_window=true], available as of iOS 18. Update your device, navigate to Settings → General ***→***About → Parts & Service History, tap Restart & Finish Repair, and follow the onscreen prompts.
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Device/iPhone%2015%20Pro|Answers community] for help.