Use this guide to remove and replace the loudspeaker in your iPhone 14 Pro.
This guide was created using the A2890 (international) model. If you're fixing a different iPhone 14 Pro model, there may be some visual discrepancies, but the procedure should be the same.
For your safety, discharge the battery below 25% before disassembling your device. This reduces the risk of fire if the battery is accidentally damaged during the repair. If your battery is swollen, [[What to do with a swollen battery|take appropriate precautions|new_window=true]].
You’ll need replacement adhesive to safely secure the screen when reassembling your iPhone. Retaining water resistance after the repair will depend on how well you reapply the screen adhesive, but note that your device will lose its official IP ([link|https://www.iec.ch/ip-ratings#:~:text=Electric%20and%20electronic%20equipment%20deteriorate,are%20widely%20used%20throughout%20industry.|Ingress Protection|new_window=true]) rating.
Remove the pentalobe screws
Mark your opening picks
Tape over any cracks
Anti-Clamp instructions
Heat the bottom edge
Insert an opening pick
Heat the right edge
Separate the right adhesive
Heat the top edge
Separate the top adhesive
Heat the left edge
Separate the left adhesive
Open the iPhone
Unfasten the battery connector cover screws
Remove the battery connector cover
Disconnect the battery
Disconnect the display cable
Remove the screen
Unfasten the loudspeaker screws
Loosen the loudspeaker
Remove the loudspeaker
Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Device/iPhone%2014%20Pro|Answers community] for help.